Tile-O-Mite
Hot Melt Adhesive for Gluing Tile Displays
PRODUCT TYPE:
Hot Melt Adhesive.
APPLICATIONS:
This product is a versatile high performance
hot melt adhesive designed for product assembly,
particularly the gluing of ceramic tile
displays. It combines medium open-time,
excellent high and low temperature properties,
oil resistance and adhesion to a broad spectrum
of difficult-to-bond substrates.
It is well suited for
gluing glass, ceramics, plastics and some
treated polyester surfaces. It forms strong
bonds with wood, fabrics, leather and other
porous and fibrous substrates. As with all
adhesives, the user must conduct tests to
determine the suitability of this product
for their use.
We offer this
product in two formulas:
- Bulk 50-pound cartons
(part# tilo-bulk) for bulk systems
- Half-inch stick form,
20-pound cartons (part# tilo-12) for use
in glue stick guns
PHYSICAL PROPERTIES
and GENERAL INFORMATION:
| |
GLUE STICK
FORMULA |
BULK
FORMULA |
| RAW
MATERIAL BASE |
Synthetic
Resin |
Synthetic
Resin |
METTLER
SOFTENING POINT |
266Å F |
294Å F |
| VISCOSITY
@ 350Å F |
8,000 cps |
20,500 cps |
| VISCOSITY @ 410Å
F |
2,000 cps |
7,000 cps |
| RATE
OF SET |
Medium |
Medium |
| SHELF LIFE |
One Year |
|
| FORM
& PACKAGING |
1/2" x 10"
Brown Stick |
Small Dark
Yellow Granule |
RECOMMENDED APPLICATION
TEMPERATURE |
275Å F |
410Å F |
CLEAN-UP INSTRUCTIONS:
Consult the equipment manufacturer for clean-up
procedures or flush the unit with mineral
oil or paraffin wax at 250ÅF. Do not exceed
a flush temperature of 300ÅF. Flush the
applicator thoroughly with hot melt to purge
the system.
(Note: cleaning is generally not required
when using glue sticks.)
SAFETY INSTRUCTIONS:
To minimize the risk of burns,
we recommend the use of eye protection and
protective clothing when working near a
hot melt applicator. To minimize the risk
of flammable vapors, do not exceed a melt
temperature above400ÅF. Prevent the build-up
of vapors. Extinguish all sources of ignition
during hot melt use.
*NOTE:
Surfaces and information above are suggestions
only... final tests for suitability remain
the responsibility of the user. As with
all hot melt adhesives the user must take
care to avoid getting hot adhesive on the
skin. TILE-O-MITE is not FDA approved for
use as a Food Packaging Adhesive. Eye protection
and protective clothing recommended. See
MSDS*
for details.
*Some articles are in
Microsoft Word (.doc) format. You must have
a current version of Word or a Word Viewer.
See the Microsoft Web site www.microsoft.com
the Word Viewer.
|
